Description

 Specifications

CEN 1/8 M-Sport Ford Puma Rally 4WD Brushless

 

What You Need (Not Included)

  • Battery and charger are not included
  • Recommend 2S - 3S Lipo Battery

 

Features

ESC  

  • 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
  • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
  • Water-Proof and Dust-Proof for All Weather.
  • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.
  • 5 Levels of acceleration/punch.
  • 9 Levels of maximum brake force.

Motor

  • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

Servo

  • 12Kg Metal Gear Servo (By Savox).
  • 4.8V - 0.26 sec/60° 10.0 kg-cm.
  • 6.0V - 0.23 sec/60° 12.0 kg-cm.
  • With 25T Horn Gear Spline.

Radio System

AMP-30 TX 3-Channel Transmitter. Frequencies: 2.4GHz.

  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Power Supply: 4 - AA Alkaline (Not Included).

 AMP30 RX 3-Channel Receiver.

  • Frequency: 2.4GHz.
  • Power Supply: DC 4.8 ~ 6.0V.
  • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

  • Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
  • Fully Detailed Injection-Molded Body Accessories Body Details
  • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis

  • 3mm Aluminum Chassis
  • Front and Rear 3mm Aluminum Shock Towers
  • Aluminum Arm Brace
  • Full Precision Ball Bearing Support
  • Wider Body Mount Positions for Better Support
  • Front Skid plate with Durable Foam Bumper
  • Injection-Molded Rear Diffuser
  • Easy Access Battery Tray
  • Battery Tray Size 142mm x 48mm

Suspension

  • Aerodynamic Lower Arm Suspension Design
  • Big Bore Oil Filled Adjustable Coil Over Shocks
  • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
  • Racing Spring
  • Adjustable Turnbuckles
  • Adjustable Wheelbase +/- 6mm

Gear Ratio

  • Spur / Pinion 46/14T 3.29:1
  • Ring & Pinion 40/17T 2.35:1

Drivetrain

  • Full Time 4-Wheels Drive
  • Center Shaft Drivetrain for more power transferred to the wheels
  • Metal Transmission Gears
  • Aluminum Adjustable Motor Mount
  • Oil Filled Two Differential Drive System      
  • Center Direct Drive
  • Hight Efficient Transmission System
  • 6 Gear Bevel Gear Type Differential
  • Front / Rear Harden Steel Dog Bone and outdrives

Wheel

  • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tires

  • High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

Specs

  • Chassis Length:  460mm
  • Chassis Width:   230mm
  • Wheelbase:  300mm
  • Ground Clearance:      25mm
  • Weight:      2.5kg

 

Please feel free to contact our friendly staff at Campbelltown Hobbies at any time for questions and or technical advice. When buying from us you can have confidence knowing that you have purchased from a retail store that offers great quality products at realistic prices and while at the same time offering the best customer service. We believe that our superior service over our competitors is what makes us stand out from the rest and we are so confident in our service to you that once you have dealt with us you will never go anywhere else.

Read More...



others also bought
More from this category
In Stock
Stock Location